View AV-56P575_1882710.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

important note: in the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). staple your sales receipt or invoice to the inside cover of this guide. keep this users guide in a convenient place for future reference. keep the carton and original packaging for future use. lct1609-001a-a 0304tnh-ii-im model number: serial number: illustration of AV-56P575 and rm-c1257g for models: av-56p585 AV-56P575 av-48p575 projection television users guide lct1609 english 3/8/04, 11:02 am 1
important safety precautions warning: to prevent fire or shock hazards, do not expose this tv set to rain or moisture. caution: to insure personal safety, observe the following rules regarding the use of this unit. 1. operate only from the power source specified on the unit. 2. avoid damaging the ac plug and power cord. 3. avoid improper installation and never position the unit where good ventilation is unattainable. 4. do not allow objects or liquid into the cabinet openings. 5. in the event of trouble, unplug the unit and call a service technician. do not attempt to repair it yourself or remove the rear cover. changes or modifications not approved by jvc could void the warranty. * when you dont use this tv set for a long period of time, be sure to disconnect both the power plug from the ac outlet and antenna for your safety. * to prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. caution: to reduce the risk of electric shock. do not remove cover (or back). no user serviceable parts inside. refer servicing to qualified service personnel. the lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. risk of electric shock do not open caution 2 important recycling information this product utilizes both a cathode ray tube (crt) and other components that contain lead. disposal of these materials may be regulated in your community due to environmental considerations. for disposal or recycling information, please contact your local authorities, or the electronic industries alliance: http://www.eiae.org lct1609 english 3/8/04, 11:02 am 2
caution: please read and retain for your safety. electrical energy can perform many useful functions. this tv set has been engineered and manufactured to assure your personal safety. but improper use can result in potential electrical shock or fire hazards . in order not to defeat the safeguards incorporated in this tv set, observe the following basic rules for its installation, use and servicing. also follow all warnings and instructions marked on your tv set. installation 1 your tv set is equipped with a polarized ac line plug (one blade of the plug is wider than the other). this safety feature allows the plug to fit into the power outlet only one way. should you be unable to insert the plug fully into the outlet, try reversing the plug. should it still fail to fit, contact your electrician. 2 operate the tv set only from a power source as indicated on the tv set or refer to the operating instructions for this information. if you are not sure of the type of power supply to your home, consult your tv set dealer or local power company. for battery operation, refer to the operating instructions. 3 overloaded ac outlets and extension cords are dangerous, and so are frayed power cords and broken plugs. they may result in a shock or fire hazard. call your service technician for replacement. 4 do not allow anything to rest on or roll over the power cord, and do not place the tv set where power cord is subject to traffic or abuse. this may result in a shock or fire hazard. 5 do not use this tv set near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near swimming pool, etc. 6 if an outside antenna is connected to the tv set, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. section 810 of the national electrical code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection requirements for the grounding electrode. (polarized-type) important safeguards ? as an energy star ? partner, jvc has determined that this product or product model meets the energy star ? guidelines for energy efficiency. 3 lct1609 english 3/8/04, 11:02 am 3
7 an outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. when installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 8 tv sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be released. therefore: never block the bottom ventilation slots of a portable tv set by placing it on a bed, sofa, rug, etc. never place a tv set in a built-in enclosure unless proper ventilation is provided. never cover the openings with a cloth or other material. never place the tv set near or over a radiator or heat register. 9 to avoid personal injury: do not place a tv set on a sloping shelf unless properly secured. use only a cart or stand recommended by the tv set manufacturer. do not try to roll a cart with small casters across thresholds or deep pile carpets. wall or shelf mounting should follow the manufacturers instructions, and should use a mounting kit approved by the manufacturer. 10 caution children about dropping or pushing objects into the tv set through cabinet openings. some internal parts carry hazardous voltages and contact can result in a fire or electrical shock. 11 unplug the tv set from the wall outlet before cleaning. do not use liquid or an aerosol cleaner. 12 never add accessories to a tv set that has not been designed for this purpose. such additions may result in a hazard. example of antenna grounding as per national electrical code use gr ound clamp electrical ser vice equipment nec - na tional electric code antenna lead in wire antenna discharge unit (nec section 810-20) gr ounding conduct ors (nec section 810-21) gr ound clamps po wer ser vice gr ounding electr ode system (nec ar ticle 250, part h) 4 iq.3-6bkdifpe 0,5,-1)..7-/j 1
13 for added protection of the tv set during a lightning storm or when the tv set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. this will prevent damage to product due to lightning storms or power line surges. 14 a tv set and cart combination should be moved with care. quick stops, excessive force, and uneven surfaces may cause the tv set and cart combination to overturn. 15 unplug this tv set from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. when the power cord or plug is damaged or frayed. b. if liquid has been spilled into the tv set. c. if the tv set has been exposed to rain or water. d. if the tv set does not operate normally by following the operating instructions. adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the tv set to normal operation. e. if the tv set has been dropped or damaged in any way. f. when the tv set exhibits a distinct change in performance this indicates a need for service. 16 do not attempt to service this tv set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. 17 when replacement parts are required, have the service technician verify in writing that the replacement parts he uses have the same safety characteristics as the original parts. use of manufacturers specified replacement parts can prevent fire, shock, or other hazards. 18 upon completion of any service or repairs to this tv set, please ask the service technician to perform the safety check described in the manufacturers service literature. 19 when a tv set reaches the end of its useful life, improper disposal could result in a picture tube implosion. ask a qualified service technician to dispose of the tv set. 20 note to catv system installer. this reminder is provided to call the catv system installers attention to article 820-40 of the nec that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. portable cart warning (symbol provided by retac) service 5 lct1609 english 3/8/04, 11:02 am 5
warnings by displaying fxed images for extended periods of time, can leave a subtle but permanent ghost image in your picture. this is referred to as "burn-in". to avoid this, mix your viewing pattern. examples include, but are not limited to the following: ? stock-market report bars ? shopping channel logos and pricing displays ? video game patterns or scoreboards ? bright station logos ? internet web sites or other computer-style images. ? dvd discs, video tapes, laser discs ? broadcast, cable, satellite channels or digital television tuners/converters. caring for the cabinet caring for the screen screen burn-in note: warranty does not cover screen burn-in or uneven picture tube aging. xyz xyz xyz xyz tv on tv off normally, light dusting with a soft, non-scratching duster will keep your tv clean. if you wish to wipe down the television, first unplug it. then wipe gently with a soft cloth, slightly moistened with water. you can add a few drops of mild liquid detergent to the water to help remove spots of oily dirt. ? do not allow liquid to enter the tv through the ventilation slots. ? do not use strong or abrasive cleaners on the tv. ? do not spray liquids or cleaners directly on the tvs surface. ? do not rub or scrub the tv harshly. wipe the set gently with a soft cloth. the screen is treated with an electrostatic-proof coating. when it gets dirty, wipe it gently with a soft cloth. if the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner and thoroughly wrung-out. then wipe immediately after with a clean, dry cloth. do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen. these will remove the coating layer and cause discolorations. do not push or hit the screen. this could cause scratches on the screen surface and image distortions. for example... 6 iq.3-6bkdifpe 0,5,-1)..7-/j 3
table of contents unpacking your tv . . . . . . . . . . . . 8 tv models . . . . . . . . . . . . . . . . 9 tv remote control . . . . . . . . . . . 10 getting started . . . . . . . . . . . . . 11 the remote control . . . . . . . . . . 11 connecting your devices . . . . . . . 12 interactive plug in menu . . . . . . . . 21 setting catv, vcr and dvd codes . . . 24 catv or satellite codes . . . . . . . . 24 vcr codes . . . . . . . . . . . . . . 25 dvd codes . . . . . . . . . . . . . . 26 search codes . . . . . . . . . . . . . 27 using the guide . . . . . . . . . . . . . 28 onscreen menu system . . . . . . . . . 29 auto tuner setup . . . . . . . . . . . . 31 channel summary . . . . . . . . . . . . 31 v-chip . . . . . . . . . . . . . . . . . . 33 set lock code . . . . . . . . . . . . . 39 adjusting crt color conversion . . . . . 40 auto demo . . . . . . . . . . . . . . . 42 language . . . . . . . . . . . . . . . . 42 closed caption . . . . . . . . . . . . . 43 auto shut off . . . . . . . . . . . . . . 43 xds id . . . . . . . . . . . . . . . . . 44 noise muting . . . . . . . . . . . . . . 44 front panel lock . . . . . . . . . . . . 44 v1 smart input . . . . . . . . . . . 45 video input label . . . . . . . . . . 45 position adjustment . . . . . . . . . . . 46 power indicator . . . . . . . . . . . . . 46 digital-in . . . . . . . . . . . . . . . . . 47 digital-in audio . . . . . . . . . . . . . 47 center ch input . . . . . . . . . . . . . 48 picture settings . . . . . . . . . . . . . 49 adjust picture settings . . . . . . . . . 49 color temperature . . . . . . . . . . . . 49 digital noise clear . . . . . . . . . . . . 50 vsm . . . . . . . . . . . . . . . . . . . 50 natural cinema . . . . . . . . . . . 50 reset . . . . . . . . . . . . . . . . . . 51 sound settings . . . . . . . . . . . . . 52 adjust sound settings . . . . . . . . . 52 mts (multi-channel sound) . . . . . . . 52 set clock . . . . . . . . . . . . . . . . 53 on/off timer . . . . . . . . . . . . . . . 54 multi screen function . . . . . . . . . . 55 index . . . . . . . . . . . . . . . . . . 55 twin . . . . . . . . . . . . . . . . . 55 freeze . . . . . . . . . . . . . . . . . . 56 swap . . . . . . . . . . . . . . . . . 56 select . . . . . . . . . . . . . . . . . . 56 power . . . . . . . . . . . . . . . . . . 57 number buttons . . . . . . . . . . . . . 57 tune . . . . . . . . . . . . . . . 57 input . . . . . . . . . . . . . . . . . . . 57 channel +/- . . . . . . . . . . . . . 57 volume +/- . . . . . . . . . . . . . 57 return + . . . . . . . . . . . . . . . 58 sound . . . . . . . . . . . . . . . . . . 58 muting . . . . . . . . . . . . . . . . . . 58 video status . . . . . . . . . . . . . . . 59 theaterpro d6500k . . . . . . . . . . . 59 sleep timer . . . . . . . . . . . . . . . 59 display . . . . . . . . . . . . . . . . . 60 c.c. . . . . . . . . . . . . . . . . . . . 60 aspect . . . . . . . . . . . . . . . . . 61 aspect ratios . . . . . . . . . . . . . 61 menu . . . . . . . . . . . . . . . . . . 62 ok . . . . . . . . . . . . . . . . . . . 62 back . . . . . . . . . . . . . . . . . . . 62 tv/catv slide switch . . . . . . . . . . 63 vcr/dvd slide switch . . . . . . . . . 63 vcr buttons . . . . . . . . . . . . . . . 63 dvd buttons . . . . . . . . . . . . . . . 63 light . . . . . . . . . . . . . . . . . . . 63 super focus . . . . . . . . . . . . . . . 63 no program . . . . . . . . . . . . . . 64 troubleshooting . . . . . . . . . . . . . 65 warranty . . . . . . . . . . . . . . . . . 66 authorized service centers . . . . . . . 67 specifications . . . . . . . . . . . . . . . 68 notes . . . . . . . . . . . . . . . . . . 69 quick setup . . . . . . . . . . . 8 remote programming . . . . . 24 onscreen menus . . . . . . . . 28 button functions . . . . . . . 55 appendices . . . . . . . . . . 64 initial setup . . . . . . . . . . 31 clock timers . . . . . . . . . . 53 picture adjust . . . . . . . . . 49 sound adjust . . . . . . . . . 52 7 warnings . . . . . . . . . . . . 6 important safety precautions . 2 lct1609 english 3/8/04, 11:02 am 7
two aa batteries 1 television 1 remote control used to connect an external antenna or cable tv system to your tv. used to make video connections with s-video vcrs, camcorders and dvd players. we recommend that before you start using your new television, you read your entire users guide so you can learn about your new televisions many great features. if youre anxious to start using your television right away, a quick setup guide follows on the next few pages. note: your television and/or remote control may differ from the examples illustrated here. quick setup unpacking your tv thank you for your purchase of a jvc color television. before you begin setting up your new television, please check to make sure you have all of the following items. in addition to this guide, your television box should include: once you have unpacked your television, the next step is to connect it to your antenna/ cable or satellite system and to connect the audio/video devices you want to use with your television. to make these connections you will use plugs like the ones illustrated below. coaxial cables 8 s-video cable used to connect audio/ video devices like vcrs, dvd players, stereo amplifiers, game consoles, etc. component cables composite cables audio cables ????? ??????? ??????????? ????? ?????? ??????????? ???????????? ? ? ? ???? ? ? ? ??????? ?????? ???? ?? ???? ? ? ? ? ??? ? ??? ? ??? ? ??? ?????????? ??????????? ???? ????? ???? ?? ??? ?? ???? ??? ??? ??????????? ?????????? ?????? ???? ??? ????? ????? ??? ? ?? ????????? ?????? ????? ???? ?????? ???????????? ????? ???? ???? ????????? ????? ???????????????????????????????? aa alkaline aa alkaline used to connect jvc av compulink capable components for an automated home theater. av compulink cable iq.3-6bkdifpe 0,5,-1)..7-/j 5
models: av-56p585 AV-56P575 av-48p575 models: av-56p585, AV-56P575, av-48p575 quick setup tv models note: before you connect your television to another device, please refer to the proper diagrams for your specific tv and remote. these will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. rear panel diagram front panel diagram 9 ?? ?? ? ??????? ? ? ? ????? ?????? ??? ?? ?? ? ?????? ??? ????? ????? ??????? ?????? ??????????? ??? ?? ??????? ??????????? ????? ??????????? ??? ???????????????? ? ?????????? ? ????? ???? ????? ?????? ?? ??????????? ?? ???????????????????? ??????????????? ????????????????? ??????? ?? ? ????????????? ?? ???????? ??? ??????????? ???? ??????????????????????????? ??????????????????????????????????????? ???????? ??????? ? ??????????????????????????????????????????? ?? ??? ? ?? ???????????????????????????????????? ????? ??????????? ????????? ???????????????? ?????????????? ??? ??????????????????????? ? ????????? ???????????? ?? ???????? ?????????????????????????????????????????????? ????????????????????????? ???????? ?????????????????????? ? ????????????????????????????? ?????????????????????????? ???????????? ???????????????????????????? ???????????????????? ??????????????????????????????? ??????????????????????? ??? ??????????????????????????????? ? ???? ????????????????????????????????????? ???????????????????????????????????????????????????????? ??????? ??????? ?????????? ????? ? ?? ?? ??????? ?? ?? ????? ?? ????? ?? ?? ?? ????? ?? ? ? ?? ??? ????? ?????? ??????? ????? ?? ? ?????????? ?? ?????????????? ?? ??????? ? ? ???? ??????? ?????? ????? ???? ? ????? ?? ????????? ? ??????? ? ??????? ? ??????? ????? ????? ? ???????? ???? ????????? ????? ???????????????????????????????? pull /o pen ?? ? ? ? ?? ? ????????? ???? ? ??????????? ??? ? ??? ??? ?? ? ?? ? ?? ?????????? ?? ????? ???? ????? ?? ??? ? ??? ? ???? ??? ????? ? ????? ???? ? ? ?? ?? ? ? ???????? ? ???????? ? ?? ? ? ? ?? ? ? ?? ?? ? ? ? ?? ? ? ? ? ? ?? ? ??? ? ? ? ? ? ? ? ? ? pull/o pe n ????????????????????? ????? ????????????? ?
????? ??????? ??????????? ????? ?????? ??????????? ???????????? ? ? ? ???? ? ? ? ??????? ?????? ???? ?? ???? ? ? ? ? ??? ? ??? ? ??? ? ??? ?????????? ??????????? ???? ????? ???? ?? ??? ?? ???? ??? ??? ??????????? ?????????? ?????? ???? ??? ????? ????? ??? ? ?? ????????? ?????? ????? ???? ?????? ???????????? ????? ???? ???? models: av-56p585 AV-56P575 av-48p575 quick setup tv remote control rm-c1257g 10 ? for information on remote control buttons, see pages 55 - 63. lct1609 english 3/8/04, 11:02 am 10
these quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. if you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. before you can operate your remote control, you first need to install the batteries (included). lift and pull the latch on the back of the remote control to open. insert two batteries (included) carefully noting the + and C markings, placing the C end in the unit first. snap the cover back into place. when you change the batteries, try to complete the task within three minutes. if you take longer than three minutes, the remote control codes for your vcr, dvd, and/or cable box/satellite receiver may have to be reset. see pages 24 - 27. quick setup getting started getting started step 1 C the remote control 11 key feature buttons the four key feature buttons at the center of the remote can be used for basic operation of the television. the top and bottom buttons will scan forward and back through the available channels. to move rapidly through the channels using jvcs hyperscan feature, press and hold ch+ or chC. the channels will zip by at a rate of five channels per second. the right and left buttons will turn the volume up or down. these buttons are also marked with four arrows and are used with jvcs onscreen menu system. to use the onscreen menus, press the m enu button. ????? ??????? ??????????? ????? ?????? ??????????? ???????????? ? ? ? ???? ? ? ? ??????? ?????? ???? ?? ???? ? ? ? ? ??? ? ??? ? ??? ? ??? ?????????? ??????????? ???? ????? ???? ?? ??? ?? ???? ??? ??? ??????????? ?????????? ?????? ???? ??? ????? ????? ??? ? ?? ????????? ?????? ????? ???? ?????? ???????????? ????? ???? ???? basic operation turn the television on and off by pressing the p ower button at the top right corner of the remote. if this is the first time you are turning on the tv, the interactive plug-in menu appears. ? make sure the tv/catv switch is set to tv. move the switch to catv only if you need to operate a cable box. ? slide the vcr/dvd selector switch to vcr to control a vcr. slide to dvd to control a dvd player. please see pages 24 to 27 for instructions on programming your remote control to operate a cable box, vcr or dvd player. ????? ??????? ??????????? ????? ?????? ??????????? ???????????? ? ? ? ???? ? ? ? ??????? ?????? ???? ?? ???? ? ? ? ? ??? ? ??? ? ??? ? ??? ?????????? ??????????? ???? ????? ???? ?? ??? ?? ???? ??? ??? ??????????? ?????????? ?????? ???? ??? ????? ????? ??? ? ?? ????????? ?????? ????? ???? ?????? ???????????? ????? ???? ???? ????? ??????? ??????????? ????? ?????? ??????????? ???????????? ? ? ? ???? ? ? ? ??????? ?????? ???? ?? ???? ? ? ? ? ??? ? ??? ? ??? ? ??? ?????????? ??????????? ???? ????? ???? ?? ??? ?? ???? ??? ??? ??????????? ?????????? ?????? ???? ??? ????? ????? ??? ? ?? ????????? ?????? ????? ???? ?????? ???????????? ????? ???? ???? ????? ??????? ??????????? ????? ?????? ??????????? ???????????? ? ? ? ???? ? ? ? ??????? ?????? ???? ?? ???? ? ? ? ? ??? ? ??? ? ??? ? ??? ?????????? ??????????? ???? ????? ???? ?? ??? ?? ???? ??? ??? ??????????? ?????????? ?????? ???? ??? ????? ????? ??? ? ?? ????????? ?????? ????? ???? ?????? ???????????? ????? ???? ???? lct1609 english 3/8/04, 11:02 am 11
quick setup connections please follow the flow chart below to determine which connection setup is right for you. then, refer to the appropriate diagrams to connect your television to other devices that you may have. after you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the tv. step 2 C connecting your devices 12 a vcr is not necessary for operation of the television. if you follow these diagrams and the television does not work properly, contact your local cable operator. ? to connect a dvd player, see diagram #3 . a dvd player is optional. ? if you have a satellite television system, please refer to the satellite tv manual. ?????????? do y ou use a cab le tv bo x? do y ou ha ve a vcr? do y ou ha ve a vcr? ?????????? ?????????? ?????????? ?? ? ?? ?? ? ?? ?? ? ?? lct1609 english 3/8/04, 11:02 am 12
quick setup connections 13 notes: ? if your vcr is a mono sound unit, it will have only one audio out jack. connect it to the left audio input on the front of the tv. ? use the s-video connection if possible for superior picture quality. ? your vcr must be turned on to view premium cable channels. ??????? ?? ?? ????? ?? ????? ?? ?? ?? ????? ?? ? ? ? ???? ????? ?????? ??????? ????? ?? ? ?????????? ?? ?????????????? ????????? ? ? ????????????? ?? ??????????? ????????????? ???????????????? ?????? ????????? ?????????????? ?? ??? ?? ??? ??????? ???????? ?? ???????? ?? ??? ????????????? ? diagram #2 note: ? if you do not have a cable box, connect the cable wire from the wall outlet into the back of the tv. ?? ? ?????????? ????????????? ????????????? ???????????????? ?????? ????????? ??????????? ?? diagram #1 i.3-6bkdifpe 5-1)..7-j .
quick setup connections notes: ? green, blue and red are the most common colors for dvd cables. some models may vary colors. please consult the users manual for your dvd player for more information. ? be careful not to confuse the red dvd cable with the red audio cable. it is best to complete one set of connections (dvd or audio output) before starting the other to avoid accidentally switching the cables. ? you may also connect the dvd player to input 1. ??????? ??????? ?????????? ????? ? ?? ?? ??????? ?? ?? ????? ?? ????? ?? ?? ?? ????? ?? ? ? ?? ??? ????? ?????? ??????? ????? ?? ? ?????????? ?? ?????????????? ?? ??????? ? ? ????????? ???? ????? ???? ??? ?? ????? ? ????????????? ??? ????????????? ?????? ??????????? ?? ??? ?? ???? ? ???????? ?? ??? ?????????????? ? ?? ??? ? ? ? ? ? ??? ? ???????? ?????? ? ?? ??????? ?? diagram #3 14 lct1609 english 3/8/04, 11:02 am 14
jvcs av compulink feature makes playing video tapes or dvds totally automatic. simply insert a pre-recorded tape into your jvc brand vcr or dvd into your jvc dvd player and the device will automatically turn on and begin playback. at the same time, using the av compulink, the vcr or dvd player sends a signal to the television telling it to turn on and switch to the proper video input. ? the av compulink cable may be included with the jvc av compulink unit you wish to connect. if it is not, contact jvc parts department at (800)-882-2345, or www.jvcservice.com for part # ewp 805-012. ? av compulink can only be used with jvc brand products. notes: ? in order for the vcr playback to begin automatically, the recording tabs must be removed from the vhs tape. if the tab is in place, automatic switching will occur when you push the vcrs p lay button. ? if your jvc brand vcr has a code/b code remote control switching (see your vcrs instruction book), using vcr a code will switch the tv to input 1. ? refer to your dvd instruction book for detailed connection information. ? to connect a jvc hifi receiver or amplifier for a completely automated home theater, see the receiver connection instructions for detailed connection information. ? av compulink is compatible with select av compulink receivers. ?? ?????????? ?? ??? ???????? ? ?? ??? ??? ????????? ???? ??????????????????? connecting to jvc av compu link quick setup connections 15 av compulink cable to connect: plug one end of the av compulink cable into the av compulink input on your vcr, dvd, or other compulink device. plug the other end of the av compulink cable into the av compulink at the rear of the television. note: ? the av compulink cable has a male 3.5 mm (mono) plug on each end. lct1609 english 3/8/04, 11:02 am 15
quick setup connections 1) connect a yellow composite cable from the camcorder video out, into the video in on the front of the tv, or connect an s-video cable from the front of the tv to the camcorder. 2) connect a white cable from the camcorder left audio out, into the left audio in on the front of the tv. 3) connect a red cable from the camcorder right audio out, into the right audio in on the front of the tv. note: ? if your camcorder is a mono sound model it will have only one audio out. connect it to the left audio in on the front of the tv. you may connect a camcorder, game console or other equipment to your television by using the front input jacks (input 4) located under the front panel door. to access, pull on the door to open it. you can also connect these using the televisions rear input jacks, using the same instructions. ????????? ???? ??????? ?????? ????? ????? ????? ?? ????????? ? ??????? ? ??????? ? ??????? ????? ????? ? ???????? ???? ????? ? 16 connecting to a camcorder lct1609 english 3/8/04, 11:02 am 16
17 quick setup connections connecting to the surround amplifier ? ???? ????????????????????? ?? ??????????????? ????????? ???? ? ???? ???????? ?????? ??????? ????? ?? ? ?????????? ?? ?????????????? ?? ??????? ? ? 1) connect the pin cable from the tv's center channel input terminal to the surround amplifier's center channel output terminal. note: ? please read the benefit of this feature on page 47. in multi-channel sound such as 5.1 channel, the speech characters are played back from the center speaker. a center speaker in a movie theater is set in back of the screen so it can recreate a conversation scene in the movie more natually. by using your tv's speaker as the center speaker, you can obtain the same sound effect as in a movie theater in you home theater sound system. lct1609 english 3/8/04, 11:02 am 17
quick setup connections 18 by connecting a digital tv reciever, high definition pictures can be displayed on your tv in their digital form. ????? ??????? ? ? ? ????? ?????? ??? ????? ?????? ??? ????? ????? ????????? ???? ??????????? ? ? ? ???????? ????? ?????? ????????? ?????? ?? ???????????????????????? ?? ?????????? ? ???????????????? ??????????????????? ??? ? connecting to a digital tv receiver 1) connect the hdmi to dvi cable from the digital out on the back of your dtv decoder, to the digital-in on the back of your television. 2) connect a red cable from the dtv decoder right audio out, to the right audio digi - tal-in on the back of your television. 3) connect a white cable from the dtv decoder left audio out, to the left audio digi - tal-in on the back of your television. ? the digital-in terminal is not compatible with the picture signal of a personal computer. ? use a hdmi to dvi cable (commercially available) in order to digitally connect the television with a dtv decoder. notes: ? if 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. access the digital-in in the initial setup menu to adjust it. (refer to page 47.) ? when you do the above connection, set digital-in audio in the initial setup menu to analog. see "digital-in audio", page 47. lct1609 english 3/8/04, 11:02 am 18
by connecting a hdmi compatible device, high definition pictures can be displayed on your tv in their digital form. some hdmi devices can include dvd players, d-vhs or any hdmi compatible device. hdmi (high definition multimedia interface) is the first industry supported, uncompressed, all digital audio/video interface. hdmi provides and interface between any audio/video source, such as a set-top box, dvd player, a/v receiver or an audio and/or video monitor, such as a digital television (dtv). ???? ? ???????? ? ? ????? ?????? ??? ???? ? ?????? ??? ????? ????? ????????? ???? ????????????? ????? ???? ? ? ? ???????? ????? ?????? ???????? ?? quick setup connections connecting to a hdmi compatible device 19 1) connect the hdmi cable from the digital out on the back of your dtv or hdmi device, to the digital-in on the back of your television. note: ? when you do the above connection, set digital-in audio in the initial setup menu to digital. see "digital-in audio", page 47. lct1609 english 3/8/04, 11:02 am 19
20 quick setup connections by connecting your av receiver to your television's v1 smart input, you can watch picture sources from many different devices, without having to change or use the other input connections on your tv. this allows you to free up the other input connections so you can connect more devices to your television. connecting to an av receiver using your television's v1 smart input ????????? ???? ?? ??????? ?? ??????? ??????? ?????????? ????? ? ?? ?? ??????? ???? ????? ?? ????? ?? ???? ????? ?? ? ? ????? ????? ????? ?? ??? ????? ?????? ? ? ? ? ? 1) connect an s-video cable from the av receiver's monitor out, to the s-video input-1 on the back of your television. 2) connect a yellow composite cable from the av receiver's monitor out, into the video input-1 on the back of your television. 3) connect a green component cable from the av receiver's y monitor out, into the y video input-1 on the back of your television. 4) connect a blue component cable from the av receiver's p b monitor out, into the pb video input-1 on the back of your television. 5) connect a red component cable from the av receiver's p r monitor out, into the pr video input-1 on the back of your television. note: ? please refer to your av receiver instruction manual for more information on connecting your speakers and other devices like a dvd player. ? use your av receiver's remote to switch to the different devices you have connected. ? some av receivers may not respond when the v1 smart input function is turned on. ? if you have video connections for each input device connected to your av receiver, you should not connect them using both s-video and composite connection at the same time when you are using v1 input as the v1 smart input. in this case we recommend using the s-video connection. lct1609 english 3/8/04, 11:02 am 20
when you turn your television on for the first time the interactive plug-in menu will appear. the plug-in menu helps you to get your tv ready to use by letting you set your preferences for: ? the language in which you want the onscreen menus to appear. ? setting the tvs clock to the correct time so your timer functions will work properly. you can choose auto or manual for setting the clock. ? the auto tuner setup of which channels you wish to receive. we recommend you complete the interactive plug-in items before you start using your television. notes: ? the interactive plug-in menu setting does not appear if your tv has been turned on before. in this case use the onscreen menus to perform these settings. see pages 42, 53 and 31. ? if you press the menu button while setting up the interactive plug-in menu, it will skip over it. step 3 C the interactive plug in menu quick setup plug-in menu 21 after the jvc interactive plug in menu has been displayed, the tv automatically switches to the language settings. you can choose to view your onscreen menus in three languages: english, french (fran?ais) or spanish (espa?ol). ? to choose a language: (english, fran?ais or espa?ol) ? to next (to set clock) language (to be continued...) language/langue/idioma english next select operate exit menu lct1609 english 3/8/04, 11:02 am 21
to set your clock manually (without using the xds signal), choose manual. if you choose auto, see auto clock set above. ? to choose manual ? to time ? to set the hour ? to minute ? to set the minute ? to start clock manual clock set note: ? you will have to reset the clock after a power interruption. you must set the clock before operating any timer functions. quick setup plug-in menu 22 before you use any of your tvs timer functions, you must first set the clock. you may precisely set your clock using the xds time signal broadcast by most public broadcasting stations. if you do not have this in your area, you will have to set the clock manually. see manual clock set below. to set the clock using the xds signal: ? to choose auto ? to time zone ? to select your time zone: (atlantic, eastern, central, mountain, pacific, alaska or hawaii) ? to move to d.s.t. (daylight savings time) ? to turn d.s.t. on or off ? to next (to auto tuner setup) notes: ? d.s.t. can be used only for us and canada when it is set to on in the set clock menu. ? only when the mode set to auto, the daylight savings time feature automatically adjusts your tvs clock for daylight savings. the clock will move forward one hour at 2:00 am on the first sunday in april. the clock will move back one hour at 2:00 am on the last sunday in october. ? you will have to reset the clock after a power interruption. you must set the clock before operating any timer functions. auto clock set (to be continued...) ????? ???? ?????? ?????????? ????????? ??????????? ?????? ??????? ???? ???? ????????? ?????? ???????? ?? ???? ????????? ?????? ???? ???????? ?? ????????? ???? ?????? ??????? ???? ???? ???? ?????????? lct1609 english 3/8/04, 11:02 am 22
quick setup plug-in menu 23 in auto tuner setup, the tv automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. this means when you scan (using the c hannel +/C buttons) you will receive only clear, active channels. ? to choose cable or air (or skip when you skip auto tuner setup) ? to start programming will take approximately 1 to 2 minutes. auto tuner setup the quick setup is complete when the setup is finished, thank you!! setup is now complete is displayed. your quick setup is now complete. you can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the jvc onscreen menu system to customize your television viewing experience. notes: ? noise muting will not work during auto tuner setup. ? skip appears only for interactive plug-in menu. cable box and satellite users: after your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. this is normal. auto tuner setup cable start select operate exit menu tuner mode st op 48 no w pr ogramming ! lct1609 english 3/8/04, 11:02 am 23
you can program your remote to operate your cable box, satellite receiver, vcr or dvd player by using the instructions and codes listed below. if the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. the remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation. 1) find the cable box or satellite brand from the list of codes shown below. 2) slide the 2-way selector switch to catv. 3) press and hold down the d isplay button, then enter the first code number listed with the 10 key pad. 4) release the d isplay button, and confirm the operation of the cable box/satellite receiver. ? if your cable or satellite box does not respond to the first code, try the others listed. if it does not respond to any code, try the search codes function, on page 27. remote programming 24 setting the catv, vcr and dvd codes cable box or satellite codes ??? ?????? ??? ?? ??? ? ????? ?? ??? ??? ??????? ????? ?????? ? ???????? ?????? ????????????? ????? ?????? ??????? ??????? ????? ????? ?? ? ?????? ? ?? ??????? ??? ??????? ? ???????? ??????? ??????? ??? ???????? ???????? ???????? ???????? ???????????? ? ??? ??? ???????? ???????? ?????????????? ?????????????? ?????????????? ??? ?????????????? ????????????? ???????? ?????????????? ?????????????? ?????????????? ??? ?????????????? ??? ??? ??? ???????? ????????????? ?????????????? ???????? ??? ?????????????? ?????????????? ??? ???????? ?????? ???????? cable bo x codes ????? ??? ????????? ????? ??????? ????????? ??????? ?????????????????? ????? ? ??? ???? ???????? ? ?????????? ? ??? ???? ?? ????? ? ???? ? ?????? ????? ???? ????? ????? ?? ? ??? ????? ??? ???????? ??? ?????????????? ?????????????? ??? ??? ?????????????? ??? ??? ???????????? ? ???????? ???????? ???????? ??? ???????? ??? ???????????? ? ??? ???????? ???????? ??? ???????? ?????? ???????? ??????????? ? ????????? ??? ???????? ? ????? ???????? ???????? ?? ???? ???? ????????? ????????? ??????? ?? ??????? ??? ??????? ??? ? ??????????? ? ?????? ?????? ?????????????? ??? ???????? ??? ??? ??? ??????? ???????????? ???????? ??? ??? ???????? ??? ???????????? ? ???????????? ? ??? ???????? ??? ???????? ???????? ?????????? ??????? ????? lct1609 english 3/8/04, 11:02 am 24
the remote control is programmed with vcr codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) find the vcr brand from the list of codes shown below. 2) slide the first 2-way selector switch to tv and the other 2-way selector switch to vcr. 3) press and hold down the d isplay button, then enter the first code number listed with the 10 key pad. 4) release the d isplay button, and confirm the operation of the vcr. ? if your vcr does not respond to the first code, try the others listed. if it does not respond to any of the codes, try the search codes function on page 27. ? after you program your remote, some vcr buttons may not work properly. if so, use the vcrs remote. ? to record, hold down the r ec button on the remote and press p lay . remote programming vcr codes 25 ??????? ??? ? ???? ? ???????????? ????????? ???? ????????? ????? ??? ????? ?? ????? ??? ?????????? ??? ?? ? ??? ???????? ??????? ?????? ????? ???? ??? ????? ???????? ??????? ????????? ????????????? ? ?????? ??? ????????????? ??????????????? ? ??? ???????? ???????? ????????????? ???????? ??? ??? ???????????? ? ??????????????? ? ??? ??????????????? ? ??? ???????????? ? ???????? ??????????????? ? ??????????????? ???????? ??????????????? ? ????????????? ??????????????? ? ??? ????????????? ??????????????? ? ???????? ??? ??????????????? ? ???????? ??????????????? ? ????????????? ???????? ??? ??? ? ?????? ??????????????? ? ???????????? ? ??????????????? ? ??? ??? ??????????????? ??????????????? ? ??? vcrs codes ????? ?? ? ??????? ??? ?? ?????? ? ??? ??????? ?????????? ????????? ??? ??????? ??????? ?? ??? ????????? ?????? ?????? ?????? ??????? ??????? ??????? ?????? ?????????? ? ??????????????? ? ??? ???????????? ? ??? ???????? ??????????????? ? ???????????? ? ????????????? ??????????????? ? ??????????????? ???????? ????????????? ??????????????? ? ??? ???????? ??????????????? ? ??? ???????? ??????????????? ? ??? ??????????????? ?????????????? ???????? ??????????????? ? ??? ??????????????? ?????????????? ??? ??????????????? ??? ??? ??????????????? ? ?????????????? ??????????????? ? ???????? ??????????????? ??? ??????????????? ?????????????? ??? ??? ??????????????? ??????????????? ??????????????? ?????????????? ???????? ????????? ??????????????? ????????????? vcrs codes ??????? ??????? ?????? ??? ?? ????? ????? ??????? ???? ? ?????????????? ??? ? ?????? ??????? ???? ???? ????????? ? ?????? ? ????? ???? ? ??????? ? ?????? ? ?????? ? ?????????????? ? ???? ??????????????? ? ???????? ??? ??????????????? ??? ??????????????? ??? ??????????????? ??????????????? ??????????????? ??? ??????????????? ?????????????? ??? ??? ??????????????? ??? ???????? ??? ??????????????? ???????????? ? ??? ??????????????? ??? ???????? ??? ???????????? ? ??????????????? ??? ??????????????? ??? ???????????? ? ????????????? ??? ??????????????? ???????? ?????? ??????????????? ??? ?????? ??????????????? ??? vcrs codes lct1609 english 3/8/04, 11:02 am 25
the remote control is programmed with dvd codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation. 1) find the dvd player brand from the list of codes shown below. 2) slide the first 2-way selector switch to tv and the other 2-way selector switch to dvd. 3) press and hold down the d isplay button, then enter the first code number listed with the 10 key pad. 4) release the d isplay button, and confirm the operation of the dvd player. ? if your dvd player does not respond to the first code, try the others listed. if it does not respond to any of the codes, try the search codes function on page 27. ? after you program your remote, some dvd buttons may not work properly. if so, use the dvd players remote. remote programming dvd codes 26 ??? ? ??? ? ????? ??????? ??? ? ?????? ? ???? ?????????? ???? ? ?? ????? ? ???????? ??????? ??????? ??? ??? ???????? ???????? ??? ??? ??? ??? ??? ??? ??? ???????? ??? d vd pla yer codes ????? ??? ????? ??????? ???? ? ???? ???? ??? ? ?? ?????? ?? ????? ?? ?? ? ????? ?????? ??? ???????? ??? ??? ??? ??? ??????????????? ? ??? ??? ??? ??? ??? ???????? dv d pla yer codes ?????? ??? lct1609 english 3/8/04, 11:02 am 26
remote programming 27 cable/satellite search codes function 1) slide the first 2-way mode selector switch to catv. 2) press the p ower and r eturn + buttons. hold for at least three seconds and release. 3) press the p ower button on the remote, and see if the cable or satellite box responds. 4) if there was a response, press r eturn + . the codes are now set. if there was no response, repeat step 3. if you repeat step 3 a total of 80 times without a response, use the remote control that came with your equipment. 5) press r eturn + to exit. vcr/dvd search codes function 1) slide the first 2-way selector switch to tv and the other 2-way selector switch to vcr or dvd. 2) press the vcr or dvd p ower and r eturn + buttons. hold for at least three seconds and release. 3) press the vcr or dvd p ower button, and see if the vcr or dvd responds. 4) if there was a response, press r eturn + . the codes are now set. if there was no response, repeat step 3. if you repeat step 3 a total of 80 times for the vcr (40 times for the dvd player), and there is no response, use the remote control that came with your equipment. 5) press r eturn + to exit. search codes lct1609 english 3/8/04, 11:02 am 27
to bring up the onscreen menu , press the m enu button on the remote control. the item that appears in green is the one currently selected. if you use the menu button on the tvs front panel instead of the remote, an additional menu screen showing input, video status and aspect will appear between initial setup and picture adjust. the interactive plug-in menu will appear the first time the tv is plugged in. note: ? menus shown in this book are illustrations, not exact replications of the televisions onscreen displays. certain symbols are used throughout this guide to help you learn about the features of your new television. the ones you will see most frequently are: ? up and down arrows mean press the c h + or c h C buttons. pressing the c h + or c h C buttons let you: ? move vertically in a main menu screen ? move through a submenu screen ? move to the next letter, number, or other choice in a submenu ? back up to correct an error ? scan through tv channels (when not in a menu screen) ? left and right arrows mean press the v olume + or v olume C buttons to move left or right to: ? select a highlighted menu item ? select an item in a submenu ? select numbers in certain menu options ? turn the volume up or down (when not in a menu screen) the press button icon means you should press the button named on your remote control. (button names appear in s mall c apital l etters .) the helping arrow icon points to the highlighted or selected item in a menu. onscreen menus 28 using the guide ????????????? ?????? ??????? ???? ???? ????????? ???????? ???????????????? ??????????????? ?????? ????????????? ??????????? ????????? ??? ????? lct1609 english 3/8/04, 11:02 am 28
your television comes with jvcs onscreen menu system. the onscreen menus let you make adjustments to your televisions operation simply and quickly. examples of the onscreen menus are shown on the next page. detailed explanations on using each menu follow later in this guide. for information about the interactive plug-in menu, see pages 21 - 23. onscreen menus 29 the onscreen menu system to open the onscreen menu system, press the m enu button on the remote control. you navigate within the onscreen menus by using the four directional arrow buttons on the remote control. (these buttons are also the c h +/C and v ol +/C buttons. channel and volume functions will not operate when the onscreen menu is active). the selected feature and option on a menu screen are highlighted in a different color. to move to a different feature use the ? arrows to move up or down the list. when you press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen will appear. use the arrows ? to select an option from the highlighted feature. pressing m enu on the remote control will close the onscreen menu system and return you to normal television viewing. each menu and its features will be discussed in the following pages of this guide. notes: ? if you do not press any buttons for a few seconds, the onscreen menu will automatically shut off. ? button names in this guide are shown in s mall c apital l etters . ? menus may appear in different sizes onscreen depending on the aspect ratio selected. ? some menu items may not appear in menu screens when certain aspect ratios or inputs are selected. selected option (green) selected option (blue) the onscreen menu system ???????? ?????????????? ??????????????????? lct1609 english 3/8/04, 11:02 am 29
press the m enu button onscreen menus notes: ? the digital-in menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen. ? when the menu button on the tv front panel is pressed, the front panel control menu between initial setup 4/4 and picture adjust 1/2 will appear. 30 ???? ????? ??????? ?????? ?????? ????????????????? ??? ?????????????? ?????? ??????? ???? ???? ????????? ???????? ?? ?? ?? ?? ?? ???????? ????? ?????? ??????? ???? ???? ????????? ???????? ???????? ?????????????? ???????????????? ??? ?????????????? ????? ??? ?? ???? ????? ???? ?????? ??????? ??? ????? ????????????????? ???????????? ?????? ??????? ???? ???? ????????? ???????? ?? ?? ?? initial setup 04 picture adjust 01 picture adjust 02 sound adjust ????????????? ?????? ??????? ???? ???? ????????? ???????? ???????????????? ??????????????? ?????? ????????????? ??????????? ????????? ??? ????? ????????? ??? ? ?????????? ?????? ?? ?????? ?????? ??????? ???? ???? ????????? ???????? clock/timers ????????????? ?????? ??????? ???? ???? ????????? ???????? ??????????????? ???????? ?????????????? ????????????? ?????? ??? ??? ????? initial setup 03 initial setup 02 ?? ??? ??? ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? ???? initial setup 01 ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ?????????? ???????????????? ??????????????? ????? ??????? ??? ???? ???????????? ??
initial setup 31 auto tuner setup the auto tuner setup function is described on page 23 as the interactive plug-in menu. if you need to run the auto tuner setup again, follow the steps below. press the m enu button ? to auto tuner setup ? to operate ? to choose cable or air press the o k button to start programming will take approximately 1 to 2 minutes. the auto tuner is finished when the message programming over! appears onscreen. channel summary channel summary allows you to customize the line-up of channels received by your tv. you can add or delete channels from the line-up or set the channel label as you like or prevent any unauthorized viewers from watching any or all 181 channels. press the m enu button ? to channel summary ? to operate the channel summary screen will now be displayed with the channels set to scan marked with an ?. you can delete channels from the scan by removing the ?. if any channels were missed during auto tuner setup and you wish to add them, you may by placing an ? next to the channel number. ? ? to the scan column press the o k button to include or delete from scan press the m enu button when finished press the menu button when finished auto tuner setup cable press to start select operate exit menu tuner mode ok ??????????????? ?? ?? ?? ?? ?? ????? ?????? ??????? ???? ???? ?? ?? ?? ?? ?? ?? ???? ????? ???? ?? ?? ??? ??? ?? ??? ? lct1609 english 3/8/04, 11:02 am 31
how to set the channel label. press the m enu button ? to channel summary ? to operate ? to the id column press the ok button to enter ? to select the character you want ? to move to the next space ...continue to follow these directions for all four spaces press the ok button to finish your characters are now set press the m enu button when finished if you want to reset the characters you set: press the m enu button ? to channel summary ? to enter ? to select reset press the ok button to finish your characters are now reset otes ? you can use characters for: alphabet, numbers, marks and spaces. ? it is possible to set the maximum of 40 channel labels. ? if you try to set more than the 40 maximum, the message "memory overflow" will appear. initial setup 32 you can block access to a channel by activating the channel lock. press the m enu button ? to channel summary ? to operate ? ? to the lock column ( ) press the z ero button to lock or unlock that channel press the m enu button when finished id press to finish select operate exit menu channel 09 reset ok lct1609 english 3/8/04, 11:03 am 32
when a viewer attempts to watch a guarded channel, the following message appears: to watch a channel that you have locked, enter the lock code using the 10 key pad. if the wrong code is entered, the message invalid lock code! will flash on the screen. the channel cannot be accessed until the correct code is entered. notes: ? once a channel has been unlocked, it will remain unlocked until the television is turned off. ? see also set lock code, page 39. initial setup 33 channel guard message you can customize the v-chip settings of your television to match your personal tastes. the v-chip menu below is the starting point for your v-chip settings you can use us v-chip settings (for programming broadcast from the united states), canadian v-chip settings (for programming broadcast from canada), and movie ratings. you may use any or all of the settings (us v-chip, canada v-chip, movie ratings). descriptions for setting each of the three v-chip formats appear in the next six pages along with descriptions of the rating categories. to access the rating categories: press the m enu button ? to v-chip ? to operate (lock icon will appear) press z ero to access the v-chip menu ? to turn v-chip on or off (v-chip must be turned on for rating settings to operate) ? to move to set us tv ratings, set movie ratings, or set canadian ratings (see following pages for descriptions of each item) v-chip your tv is equipped with v-chip technology which enables you to block channels or content that you feel to be inappropriate for children, based on us and canada rating guidelines. v-chip has no effect on video signals from a dvd discs, vcr tapes or camcorder connection. note: some programs, and movies are broadcast without a ratings signal. even if you set up v-chip ratings limits, these programs will not be blocked. see page 34 for information on how to block unrated programs. note (for canadian viewers): the v-c hip function is based on specifications designed for the united states and therefore may not work properly in canada. v-chip set us tv ratings set movie ratings set canadian ratings eng set canadian ratings fre unrated v-chip select operate exit menu view off this channel is locked by channel gu ard . please enter lock code by 10 key p ad to unlock it . no . - - - - lct1609 english 3/8/04, 11:03 am 33
you can block programs that are not rated. press the m enu button ? to v-chip ? to operate (the lock icon appears) press z ero to access v-chip setup options ? to unrated ? to view or block press m enu when done directions to block unrated programs initial setup unrated programs unrated programming refers to any programming which does not contain a rating signal. programming on television stations which do not broadcast rating signals will be placed in the unrated programming category. examples of unrated programs: ? emergency bulletins ? locally originated programming ? news ? political programs ? public service announcements ? religious programs ? sports ? weather ? some commercials note: ? tv programs or movies that do not have rating signals will be blocked if the unrated category is set to block. 34 v-chip set us tv ratings set movie ratings set canadian ratings eng set canadian ratings fre unrated v-chip select operate exit menu view off lct1609 english 3/8/04, 11:03 am 34
u.s. parental rating systems programs with the following ratings are appropriate for children. tv y is appropriate for all children programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6. tv y7 is for older children most parents would find such programs suitable for children 7 and above. these programs may contain some mild fantasy violence or comedic violence, which children should be able to discern from reality. programs with the following ratings are designed for the entire audience. tv g stands for general audience most parents would find these programs suitable for all age groups. they contain little or no violence, no strong language, and little or no sexual dialog or situations. tv pg parental guidance suggested may contain some, but not much, strong language, limited violence, and some suggestive sexual dialog or situations. it is recommended that parents watch these programs first, or with their children. tv 14 parents strongly cautioned programs contain some material that may be unsuitable for children under the age of 14 including possible intense violence, sexual situations, strong coarse language, or intensely suggestive dialog. parents are cautioned against unattended viewing by children under 14. tv ma mature audiences only these programs are specifically for adults and may be unsuitable for anyone under 17 years of age. tv ma programs may have extensive v, s, l, or d. us v-chip ratings initial setup 35 viewing guidelines in addition to the ratings categories explained above, information on specific kinds of content are also supplied with the v-chip rating. these types of content may also be blocked. the content types are: ? v/fv is for violence/fantasy violence ? s stands for sexual content ? l stands for strong language ? d stands for suggestive dialog lct1609 english 3/8/04, 11:03 am 35
initial setup 36 line up the cursor in the column (tv pg, tv g, etc.) with the content row (v/fv, s, etc.) and press the ? or ? to move the cursor to the correct location. press o k to turn the locking feature on or off. an item is locked if the icon appears instead of a . for example. to block viewing of all tv 14 shows, move the cursor to the top row of that column and add a lock icon. once youve put a lock on the top row, everything in that column is automatically locked. ? ? to the tv 14 column press the o k button to lock press the m enu button when finished note: ? if you want to change the setup, move the cursor to the top column and change the lock icon to by pressing ok again. you may then select individual categories to block. directions to set us v-chip ratings press the m enu button ? to v-chip ? to operate (lock icon appears) press z ero to access the v-chip menu ? to turn v-chip on or off ? to move to set us tv ratings ? to operate setting us v-chip ratings v/fv s l d set us tv ratings select operate exit menu tv ma tv 14 tv pg tv g tv y7 tv y ok v-chip set us tv ratings set movie ratings set canadian ratings eng set canadian ratings fre unrated v-chip select operate exit menu view off lct1609 english 3/8/04, 11:03 am 36
initial setup nr C not rated this is a film which has no rating. in many cases these films were imported from countries which do not use the mpaa ratings system. other nr films may be from amateur producers who didnt intend to have their film widely released. nr (not rated) programming may contain all types of programming including childrens programming, foreign programs, or adult material. g C general audience in the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age. pg C parental guidance parental guidance means the movie may contain some contents such as mild violence, some brief nudity, and strong language. the contents are not deemed intense. pg-13 C parents strongly cautioned parents with children under 13 are cautioned that the content of movies with this rating may include more explicit sexual, language, and violence content than movies rated pg. r C restricted these films contain material that is explicit in nature and is not recommended for unsupervised children under the age of 17. nc-17 C no one under 17 these movies contain content which most parents would feel is too adult for their children to view. content can consist of strong language, nudity, violence, and suggestive or explicit subject matter. x C no one under 18 inappropriate material for anyone under 18. movies ratings press the m enu button ? to v-chip ? to operate (lock icon appears) press z ero to access v-chip setup options ? to set movie ratings ? to enter movies menu for example: to block viewing of x and nc-17 rated from shows: ? ? to the x column press the o k button to lock ? ? to the nc-17 column press the o k button to lock press the m enu button to finish directions to set movie (mpaa) ratings 37 set movie ratings select operate exit menu x n c 17 r pg g p g 13 nr ok lct1609 english 3/8/04, 11:03 am 37
press the m enu button ? to v-chip ? to operate (lock icon appears) press z ero to access v-chip setup options ? to set canadian ratings eng (for english) ? to enter ratings menu for example: to block viewing of programming rated 14+ and 18+: ? to the 18+ column press the o k button to lock ? to the 14+ column press the o k button to lock press the m enu button to finish note: ? for instructions on set canadian ratings fre (in french), please see page 38 in the french side of this users guide. directions to set canadian v-chip ratings exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming. violence guidelines: there will be no realistic scenes of violence. depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature. violence guidelines: any realistic depictions of violence will be infrequent, discreet, of low intensity and will show the consequences of the acts. there will be no offensive language, nudity or sexual content. programming will contain little violence and will be sensitive to themes which could affect younger children. programming intended for a general audience, but which may not be suitable for younger children. parents may consider some content not appropriate for children aged 8-13. parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. programming may contain mature themes and scenes of intense violence. material intended for mature audiences only. canadian v-chip ratings initial setup 38 ??? ??? ? ? ? ? ? ? ???????????????????????? ?????? ??????? ???? ???? ?? lct1609 english 3/8/04, 11:03 am 38
channel guard and v-chip settings are protected by a four-digit lock code. your tv comes preset with a lock code of 0000. you may change the code to any four-digit number you wish. to change the lock code, follow the steps below. press the m enu button ? to set lock code ? to operate (lock icon appears) press z ero to access the lock code the first digit will be highlighted ? to select the number ? to move to the next digit continue to follow these directions for all four numbers press the ok button to finish (your lock code is now set) press the menu button when finished ? after a power interruption you must reset the lock code. ? write your lock code number down and keep it hidden from potential viewers. ? if you forget the lock code, a new code may be set using the steps listed above. notes: when a viewer attempts to watch a blocked channel, this message appears: the channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code). initial setup 39 set lock code lock code set lock code select operate exit menu press to finish 0000 ok this programming exceeds your rating limits. please enter lock code by 10 key pad to unlock it. no. - - - - lct1609 english 3/8/04, 11:03 am 39
initial setup this tv has three color projection tubes: one for red, green, and blue. when mixed together in the proper portions, the output of these three color tubes can produce any color. to produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. the produce of aligning these picture beams is called convergence. attention: ? please have your tv on for at least 20 minutes before using this feature. ? this adjustment will be needed only when the colors of the characters/lines are separated and lack in distinction. if not, please dont perform the adjustment. colors may become separated after the tv has been moved, or over a long period of time if regularly subjected to low levels of vibrations. if the colors become separated, please perform the adjustments below again. in the beginning, please be sure to perform auto convergence adjustment. press the m enu button ? to convergence ? to enter ? to select auto (the convergence adjustment will start. it will take about 50 seconds). when the adjustment is finished, it will return to what you were watching. note: ? you can reset the adjustment if you do not like the results. see the next page. ? if you want to adjust it more, you can perform the manual color convergence adjustment. see the next page. ? you can also access this feature by pressing the s uper f ocus button on the front panel of your tv. 40 ??????????? ????? ???? ?? ???? ?????? ????? ?? ???? ? ??? ??????????? ? ? ? ? ? adjusting crt color convergence auto menu channel v olume super focus opera te C + C + input- 4 s-video video audio r l / mono over open super focus ??????????? ????? ???? ?? ???? ?????? ????? ?? ???? ? ??? ??????????? ? ? ? ? ? lct1609 english 3/8/04, 11:03 am 40
press the m enu button ? to convergence ? to enter ? to choose manual ? to enter if all the lines are white, no convergence adjustment is necessary. if not, you need to perform the manual color convergence below. select the location you want to adjust by using the number buttons on the remote control. you can select any of the 81 points. press the s elect button to change the color of the box to the color of the cross you wish to adjust (red or blue). ? ? adjust the position of the cross. adjust the three color crosses until they overlap and appear as a single white cross. press the o k notes: ? when you adjust the convergence, make sure you start with the center position (position 5), and work your way around radially for best results. ? when you make the adjustment in the center (position 5), you are making the adjustment for the whole screen. in other positions, you are making the adjustment only in that area. ? you can reset the adjustment if you do not like the results. see below. ? if you perform auto convergence after performing manual convergence, your manual convergence you performed will be cancelled. initial setup 41 adjusting crt color convergence (continued...) manual ??????????? ????? ???? ?? ???? ?????? ????? ?? ???? ? ??? ??????????? ? ? ? ? ? reset reset resets all convergence adjustments to the factory default settings. press the m enu button ? to convergence ? to enter ? to reset ? to enter when the adjustment is reset, it will return to what you were watching. ??????????? ????? ???? ?? ???? ?????? ????? ?? ???? ? ??? ??????????? ? ? ? ? ? ??????????? ????? ???? ?? ???? ?????? ????? ?? ???? ? ??? ??????????? ? ? ? ? ? lct1609 english 3/8/04, 11:03 am 41
this function lets you preview the many different viewing modes of your tv. it will cycle through multi screen demo, picture in picture demo, all of the different aspect ratios and all of the different video status modes. press the m enu button ? to auto demo ? to turn auto demo on or off note: ? to stop auto demo, press the m enu button, and select auto demo by pressing the ? buttons, and turn it off by pressing the ? buttons. press the m enu button to finish. initial setup ????????????? ?????? ??????? ???? ???? ????????? ???????? ???????????????? ??????????????? ?????? ????????????? ??????????? ????????? ??? ????? the language function is described on page 21 as the interactive plug-in menu. if you need to choose the language again, follow the steps below. press the menu button ? to language ? to choose a language: eng. (english), fran. (french) or esp. (spanish) press the m enu button when finished language ????????????? ?????? ??????? ???? ???? ????????? ???????? ??????????????? ???????? ?????????????? ????????????? ?????? ??? ??? ????? 42 auto demo lct1609 english 3/8/04, 11:03 am 42
initial setup 43 many broadcasts now include an onscreen display of dialog called closed captions. some broadcasts may also include displays of additional information in text form. your television can access and display this information using the closed caption feature. to activate the closed caption feature, follow the steps below. press the m enu button ? to closed caption ? to operate ? to select caption or text in mode ? to select caption or text ? to select a caption (cc1 to cc4) or text channel (t1 to t4) press the ok button to save press the m enu button when finished ? closed caption subtitles are usually found on closed caption channel cc1. some programs may include additional text information which is usually found on text channel t1. the other channels are available for future use. ? closed captioning may not work correctly if the signal being received is weak or if you are playing a video tape. ? most broadcasts containing closed captioning will display a notice at the start of the program. ? to select the mode, press the c.c. button. see page 60. notes: closed caption this function automatically shuts off your tv when there is no signal from the channel the tv is on. press the m enu button ? to auto shut off ? to turn on or off press the m enu button when finished ? if the channel that you have on does not receive a signal for more than one minute, the blinking text not receiving a signal auto shut off in 9 min. appears on the screen, and starts the countdown. if no signal is being received within 10 minutes, the tv shuts itself off. auto shut off ????????????? ?????? ??????? ???? ???? ????????? ???????? ??????????????? ???????? ?????????????? ????????????? ?????? ??? ??? ????? ?????????????? ?????? ??????? ???? ???? ??????????????????? ?? ???? ???? ??????? ???? ??? ?? lct1609 english 3/8/04, 11:03 am 43
xds id display provides a channels call letters, the networks name, and even a program name. the xds id information is provided by the broadcaster. press the m enu button ? to xds id ? to turn on or off press the m enu button when finished xds id ????????????? ?????? ??????? ???? ???? ????????? ???????? ??????????????? ???????? ?????????????? ????????????? ?????? ??? ??? ????? initial setup 44 this feature inserts a blank grey screen over channels which are not broadcasting or are too weak to be received clearly. press the m enu button ? to noise muting ? to turn noise muting on or off press the m enu button when finished note: ? noise muting will not work during auto tuner setup or when you operate channel summary. ?? ??? ??? ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? ???? noise muting this allows you to lock the keys on the front of the tv, so that a child may not accidentally change your viewing preferences. press the m enu button ? to front panel lock ? to turn on or off press the m enu button when finished front panel lock you can turn off this feature in the following ways: ? unplug the power cord, and plug it back in. do this if your batteries die, or you lose your remote control. ? use the remote control. ? press the m enu button on the front of the tv for more than 3 seconds. in this case, the osd for front panel lock will appear. note: ? to turn on/off the tv, press the power button for more than 3 seconds. this feature will remain on. ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???? ?? ??? ??? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? lct1609 english 3/8/04, 11:03 am 44
this feature is used if you have connected an av receiver to your television. by turning this feature on, your television can automatically detect the signal source from your components that are connected to your av receiver. press the m enu button ? to v1 smart input ? to turn on or off press the menu button when finished notes: ? if you do not have an av receiver connected to your television, turn this feature off. by doing so, you can take advantage of using av compulink components with your television. ? some av receivers may not work with this function. initial setup v1 smart input ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???? ?? ??? ??? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? 45 this function is used to label video input connections for the onscreen displays. press the m enu button ? to video input label ? to operate ? to select the desired video input ? to select the desired preset input label (see chart below) press the ok button to save press the m enu button when finished ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???? ?? ??? ??? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? ????????????????? ??? ??? ??? ???? ??? ??????? ??????? ??????? ??????? ?????????? ?????? ??????? ???? ???? ??????????????????? ?? ?????? ?????? ??? ?? ? ????? ??? ?? ? ??? ???? ??? ???? ? ????? ?? ??? ???????????????????????????????? ? ????? ?? ??????????????????????????????????? ? ????? ????????????? ???????????????????????????????? ? ????? ??????????????? ?????????????????????????????? ? ????? ????????????????????? ??????????????????????????????? ? ????? ???????????????????????????????????????????? ? ????? ?? ??? ??????????????????????????????????????? ? ????? ?? ??? ????????????????????????????????????????? ? ????? ?? ??? ?????????????? ? ??????????????????????????????? ?????????????? video input label ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???? ?? ??? ??? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? ????????????????? ??? ??? ??? ???? ??? ??????? ??????? ??????? ??????? ?????????? ?????? ??????? ???? ???? ??????????????????? ?? ?????? ?????? ??? ?? ? ????? ??? ?? ? ??? ???? ??? ???? ? ????? ?? ??? ???????????????????????????????? ? ????? ?? ??????????????????????????????????? ? ????? ????????????? ???????????????????????????????? ? ????? ??????????????? ?????????????????????????????? ? ????? ????????????????????? ??????????????????????????????? ? ????? ???????????????????????????????????????????? ? ????? ?? ??? ??????????????????????????????????????? ? ????? ?? ??? ????????????????????????????????????????? ? ????? ?? ??? ?????????????? ? ??????????????????????????????? ?????????????? ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???? ?? ??? ??? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? ????????????????? ??? ??? ??? ???? ??? ??????? ??????? ??????? ??????? ?????????? ?????? ??????? ???? ???? ??????????????????? ?? ?????? ?????? ??? ?? ? ????? ??? ?? ? ??? ???? ??? ???? ? ????? ?? ??? ???????????????????????????????? ? ????? ?? ??????????????????????????????????? ? ????? ????????????? ???????????????????????????????? ? ????? ??????????????? ?????????????????????????????? ? ????? ????????????????????? ??????????????????????????????? ? ????? ???????????????????????????????????????????? ? ????? ?? ??? ??????????????????????????????????????? ? ????? ?? ??? ????????????????????????????????????????? ? ????? ?? ??? ?????????????? ? ??????????????????????????????? ?????????????? ? ?????
initial setup 46 position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema, or full. press the m enu button ? to position adjustment ? to enter ? ? to adjust the position press the m enu button to finish notes: ? to reset the adjustment to the center, press the o k button. ? when the arrow disappears, while you are adjusting the position, the position is at its maximum limit. ? if you select regular size with aspect or multi screen, position adjustment option is not seen. ? when you change the screen size, perform the position adjustment again. ? position adjustment allows you to adjust the screen position vertically and horizontally when the aspect is set hd panorama or cinema zoom for 1080i and 720p signals. position adjustment operate reset exit ok menu power indicator allows you to adjust the brightness of the power indicator press the m enu button ? to power indicator ? to adjust power indicator low, high or off notes : ? when off is selected : the led disappears if you have a tv signal. the led is lit as low when there is no tv signal. ? when the on timer turns on, the led is lit as "low" when you turn the power off. power indicator ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ???? ?? ??? ??? ???????????? ???????????????? ?????????????? ????????????????? ??????????????????? ??????????????? lct1609 english 3/8/04, 11:03 am 46
initial setup 47 the digital-in option can only be displayed in the initial setup menu when a hdmi480p picture signal is being input to the digital-in terminal. this option adjusts the position when a hdmi or dvi 480p picture signal is being displayed on the screen. there are two types of hdmi480p picture signals: 640x480 and 720x480. if the displayed picture is slightly shifted, the position can be adjusted by selecting either size1 or size2. press the m enu button ? to digital-in ? to enter ? to select size1 or size2 press the m enu button to finish note: ? the digital-in menu can only be displayed when a hdmi or dvi 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen. digital-in ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ?????????? ???????????????? ??????????????? ????? ??????? ??? this feature is used if you have a dtv or hdmi compatible component connected to your tv. press the m enu button ? to digital-in audio ? to select analog or digital press the menu button when fnished notes: ? if your dtv or hdmi component is capable of digital audio and video, choose digital. if your dtv or hdmi component is capable of analog audio and digital video, choose analog. ? refer to your dtv or hdmi components instruction manual for more information. digital-in audio ????????????? ?????? ??????? ???? ???? ????????? ???????? ????? ?????????? ???????????????? ??????????????? ????? ??????? ??? lct1609 english 3/8/04, 11:03 am 47
initial setup 48 when you are using a surround system, you can substitute the speaker of this television for the center speaker of you surround system. set center ch input to on when you use the speaker as the center speaker of your surround system. press the m enu button ? to center ch input ? to adjust center ch input to on or off press the m enu button when finished center ch input ????????????? ?????? ??????? ???? ???? ????????? ???????? ?????????? ???????????????? ??????????????? ????? ??????? ??? ????? lct1609 english 3/8/04, 11:03 am 48
press the m enu button ? to tint, color, picture, bright or detail ? to enter ? to adjust the setting ? to move to the next setting press the m enu button when finished these settings allow you to change and adjust the way the picture appears on your television. tint tint allows you to adjust the levels of red and green in your tv picture. color the color function lets you make all the colors in the tv picture appear either more vivid or subtle. picture picture allows you to adjust the levels of black and white on the tv screen, giving you a darker or brighter picture overall. bright you can adjust the overall brightness of the tv picture with the bright control. detail the detail feature adjusts the level of fine detail displayed in the picture. picture adjust 49 picture settings adjust the picture settings color temperature you can decide how strong or dull the colors appear on the tv screen. press the m enu button ? to color temperature ? to enter ? to set low or high press the m enu button when finished ?????????????? ?????? ??????? ???? ???? ????????? ???????? ???????? ??? ?? ?? ?? ?? ?? ???? ????? ??????? ?????? ?????? ????????????????? ????? color tempera ture lo w high tint +02 ???? ????? ??????? ?????? ?????? ????????????????? ??? ?????????????? ?????? ??????? ???? ???? ????????? ???????? ?? ?? ?? ?? ?? ???????? ????? lct1609 english 3/8/04, 11:03 am 49
velocity scan modulation circuitry varies the electron beams horizontal scanning speed to help accentuate the differences in picture brightness to sharpen the edges of images. press the m enu button ? to vsm ? to enter ? to turn vsm on or off ?????? ??????? ???? ???? ????????? ???????? ???????? ?????????????? ???????????????? ??? ?????????????? ????? ??? ?? ???? ????? picture adjust 50 (vsm) velocity scan modulation with digital noise clear, this helps take our static or noise from a channel that may not be coming in clearly. press the m enu button ? to dig. noise clear ? to enter ? to select the mode low, high or off press the m enu button when finished digital noise clear dig. noise clear off lo w high vsm on off natural cinema natural cinema corrects the problem of blurred edges which may occur when viewing a program originally shot on film (such as motion pictures) or animation. if you notice blurring at the edges of these programs, choose n atural c inema and set it to auto. natural cinema helps correct conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the television rate of 30 frames-per-second. press the m enu button ? to natural cinema ? to enter ? to select the mode auto", "on" or "off press the m enu button when finished notes: the natural cinema mode is automatically set to auto in the following cases: ? turning on or off ? changing the channel or input mode ? using multi-screen functions na tural cinema auto on off lct1609 english 3/8/04, 11:03 am 50
reset reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig. noise clear and vsm) at once to the default settings. press the m enu button ? to reset ? to enter the onscreen menu disappears for a moment, and then the settings are reset to the default setting for all the picture adjustments. press the m enu button when finished ?????? ??????? ???? ???? ????????? ???????? ???????? ?????????????? ???????????????? ??? ?????????????? ????? ??? ?? ???? ????? picture adjust 51 lct1609 english 3/8/04, 11:03 am 51
mts technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a tv program. in addition to mono or stereo sound, an mts broadcast may also include a second audio program (sap) . press the m enu button ? to mts ? select the mode (the on air arrow tells you if a broadcast is in stereo and/or contains an sap). press the m enu button when finished notes: ? keep the tv in stereo mode to get the best sound quality. the sound will work in stereo mode even if a certain broadcast is in mono sound only. ? choose the mono setting to reduce excessive noise on a certain channel or broadcast. ? selecting sap will allow you to hear an alternative soundtrack, if one is available. ? mts unavailable if your televisions input source is in input 1, 2, 3 or 4 mode, as described on page 57. these settings allow you to change and adjust the sound on your television. bass C you can increase or decrease the level of low-frequency sound in the tvs audio with the bass adjustment. treble C use treble to adjust the level of high-frequency sound in your tvs audio. balance C adjust the level of sound between the tvs left and right speakers with the balance setting. press the m enu button ? to bass, treble or balance ? to adjust the setting ? to move to the next setting press the m enu button when finished note: ? you can reset the sound adjustments (bass, treble and balance) you set at once as the default setting when you select reset. see page 51. ? you can adjust balance only when a.h.s. is off. see page 58. sound adjust 52 sound settings mts (multi-channel television sound) adjust the sound settings ???? ?????? ??????? ??? ????? ????????????????? ???????????? ?????? ??????? ???? ???? ????????? ???????? ?? ?? ?? ?????? ???? ?????? ??????? ??? ????? ????????????????? ???????????? ?????? ??????? ???? ???? ????????? ???????? ?? ?? ?? reset reset resets all sound adjustments (bass, treble and balance) at once to the default settings. see page 51 on how to use reset. lct1609 english 3/8/04, 11:03 am 52
clock/timers 53 set clock the set clock function is described on page 23 as the interactive plug-in menu. you can choose to set the clock automatically, or manually. if you need to set the clock again, follow the steps below. press the m enu button ? to set clock ? to operate when you set the clock automatically, choose auto by pressing the or ? arrows. ? to time zone ? to select your time zone ? to d.s.t. (daylight savings time) ? to turn d.s.t. on or off press ok to finish press the m enu button when finished when you set the clock manually, choose manual by pressing the or ? arrows. ? to move to the hour ? to set the hour ? to move to minutes ? to set the minutes press ok to start clock press the m enu button when finished ????????? ???????????????????????? ?????? ??????? ???? ???? ?? ???? ????????? ?????? ?????? ???????? ?? ???? ?????????? ????????? ??????????????????? ?????? ??????? ???? ???? ?? ???? ????????? ?????? ???? ???????? ?? ???? ?????????? thank you !! ? ??????? ??????? ??????? ????? ??? ??? ??? ?????? ?? ????? notes: ? d.s.t. can be used only for us and canada when it is set to on in the set clock menu. ? only when the mode set to auto, the daylight savings time feature automatically adjusts your tvs clock for daylight savings. the clock will move forward one hour at 2:00 am on the first sunday in april. the clock will move back one hour at 2:00 am on the last sunday in october. ? you will have to reset the clock after a power interruption. you must set the clock before operating any timer functions. lct1609 english 3/8/04, 11:03 am 53
the on/off timer lets you program your television to turn itself on or off. you can use it as an alarm to wake up, to help you remember important programs, or as a decoy when youre not home. press the m enu button ? to on/off timer ? to operate (begins with on time) ? to set the hour (am/pm) you want the tv to turn on ? to move to minutes ? to set the minutes ? to accept on time and move to off time (the time the tv will turn off). set the off time the same way as on time ? to accept off time and move to channel ? to select channel ? to on volume ? to set the volume level ? to move to mode ? choose once or everyday ? to on/off timer ? choose yes to accept the timer setting, choose no if you dont wish to accept press the ok button to finish press the m enu button to exit the menu ? the on/off time cannot be set to locked or guarded channels. ? in order for the on/off timer to work, the clock must be set. ? after a power interruption, the timer settings must be reset. notes: clock/timers 54 on/off timer on time off time channel on volume mode on/off timer 7:00 pm 10:00 pm 03 current everyday no on/off timer select operate exit menu press to finish ok lct1609 english 3/8/04, 11:03 am 54
your television has two kinds of screen: twin (2 channels) and index (12 channels). button functions 55 multi screen function note: after you press any multiscreen button, if you press the menu button, only the picture adjust screen will appear. this allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. notes: ? only rf input signal will be displayed. ? you can watch the channel added in channel summary. see page 31. index 1 5 9 2 6 10 3 7 11 4 8 12 1 2 3 1 twin activate the split-screen option by pressing t win on the remote control. the channel (or input) you were watching before pressing t win will appear on the left, the new channel will appear on the right. the sound will continue to come from the main screen channel (or input). to turn split-screen off and return to normal television viewing, press t win again or press the b ack button. 07 main screen picture v-1 split screen picture notes: ? main screen and split screen will not display the same channel or input at the same time. ? you can enter the twin mode when the screen is in normal or index mode. ? split-screen functions will not work with locked channels or channels blocked by v-chip ratings limits. a grey screen will display instead. ? with split screen, the picture from the component terminal and digital-in terminal will not be displayed. ? the aspect of main channel picture becomes 16:9 when you input the picture of 480p, 720p and 1080i from the component terminal and digital-in terminal. ? after you press the s elect button, and select split screen when you press the ok button, select normal screen. if you dont operate, the main channel screen will be automatically selected about 8 seconds later. ? aspect does not work in twin mode. ? when you press the menu button in twin mode, it appears only as picture adjust menu. lct1609 english 3/8/04, 11:03 am 55
button functions 56 you can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the s wap button. freeze swap with select, you can select the picture (channel) while viewing split screen. when you press s elect button, the channel number on the top will be highlighted. each press of s elect will shift the channel. select note: when the screen is in freeze mode, if you do not operate it within 15 minutes, this function will cancel out. pressing the f reeze button causes the screen to change to the split-screen display with the still picture displayed on the right. in order to return to the normal display, press the f reeze button once again. lct1609 english 3/8/04, 11:03 am 56
button functions 57 turns the tv on or off. press the p ower button use the number buttons on the remote control to move directly to a specific channel. for example, to move to channel 12: 0 (zero) 1 (one) 2 (two) power number buttons - 10key pad tune selects the signal input source for the television: input-1, 2, 3, 4 or digiatl-in for video devices like vcrs dvd players, or camcorders. press the i nput button by every press of the i pt button, you can change the input mode. notes: ? when you return to tv mode, press the r eturn + button or direct 10 key pad. ? you can also access the front control panel screen by using the m enu button on the front of the tv instead of the remote control. it appears between initial setup and picture adjust screen, and it has input, video status and aspect menus. choose input by pressing m enu ? on the front panel and choose a mode by using the c hannel +/- buttons ( operate ? ). input use these buttons to move up or down all the available channels your tv is able to receive. channel +/C use these buttons to raise or lower the tvs volume level. volume +/C lets you decide the input channel and select it. after you press the number buttons on the remote, press the t une button. for example, to move to channel 12: 1 (one) 2 (two) press the t une button lct1609 english 3/8/04, 11:03 am 57
the r eturn + button has two functions: return - returns to the channel viewed just before the channel currently onscreen. return+ - lets you program a specific channel to return to while scanning through the channels using the ch+ and chC buttons. r eturn + and hold for three seconds the channel currently active has been programmed as your return+ channel. now scan through the channels using the c hannel +/C buttons. r eturn + you will return to your programmed channel. ? to cancel your return+ channel, press and hold the r eturn + button for three seconds. the message return channel cancelled! will appear. ? return+ works only with the c hannel +/C buttons. pressing any number key will cancel return+. button functions 58 return + note : smart sound (av-56p585 only) by pressing the s ound button, you can change the a.h.s. (advanced hyper surround) mode, bbe, and smart sound on or off. a.h.s. - adds a more spacious surround sound. music gives basic effect and movie for more effect. bbe - bbe high definition sound restores clarity and presence for better speech intelligibility and musical realism. smart sound - decreases high sound levels, giving a regulated sound level. press the s ound button ? to select a.h.s., bbe or smart sound ? to choose the setting press the m enu when finished note: manufactured under license from bbe sound, inc. licensed by bbe sound, inc. under usp4638258, 5510752 and 5736897. bbe and bbe symbol are registered trademarks of bbe sound, inc. sound the m uting button instantly turns the volume down completely when you press it. press m uting and the volume level will instantly go to zero. to restore the volume to its previous level, press m uting again. muting ???????????? ?????? ????? ?? ???? ???? ????? ? ??? ???? ??????? ?? ??????????????? ??????? ?????? return channel pr ogrammed! lct1609 english 3/8/04, 11:03 am 58
the v ideo s tatus button gives you a choice of four tv picture display settings, including a display of your own preferences. standard - resets the picture display to the factory settings. dynamic - gives a vivid picture with better contrast when viewing in a brightly lit room. theater - gives a rich, film-like look to video when viewing in a dimly lit room. game - used for when you are playing video games connected to your tv. press the v ideo s tatus button by every press of the io tat button, you change the mode. note: ? you can also change the mode by pressing the ? buttons. ? you can also access the front control panel screen by using the m enu button on the front of the tv instead of the remote control. it appears between initial setup and picture adjust screen, and it has input, video status and aspect menus. choose video status by pressing m enu ? on the front panel and choose a mode by using the c hannel +/- buttons ( operate ? ). video status button functions 59 the theaterpro d6500k color temperature technology function makes sure that the video you watch is set to the standard color temperature, so that what you see is as true to what the film to video editors intended it to be. press the t heater p ro button theaterpro d6500k video sta tus st and ard d ynamic thea ter game the sleep timer can turn the tv off for you after you fall asleep. program it to work in intervals of 15 minutes, for a total time of up to 180 minutes. press the s leep t imer button sleep timer message 20 seconds before the automatic shutoff, this message will appear: you then have 20 seconds to press the s leep t imer button to delay the shut off for another 15 minutes. sleep timer good night!! push sleep timer button to extend 0 15 30 45 60 75 90 105 120 135 150 165 180 lct1609 english 3/8/04, 11:04 am 59
button functions 60 the display screen shows the current status of timers, inputs, and xds id. press the d isplay button the screen to the right shows the following information: ? the current channel or av input (channel 05) ? the current time (12:20 pm) ? sleep timer status/minutes remaining (the sleep timer is off) ? on/off timer status (set to turn on everyday at 7:00 pm, off at 10:00 pm) ? each press of the d isplay button changes the display mode: display - full screen shown above time - shows the current time only channel - shows the current channel off - turns display off notes: ? you may also turn off the display at any step by pressing m enu . ? if the clock, sleep timer or on/off timer are not set, the display screen will show: clock not set, sleep timer off, and on/off timer off respectively. display 05 kl vx pbs j azz festiv al no w sleep timer on/off timer on time off time 12:20 pm off ever yd ay 7:00 pm 10:00 pm displa y time channel off c.c. (closed caption) use the c.c. (closed caption) button to select the mode of closed caption. press the c.c. button av-56p585 only AV-56P575 and av-48p575 only ? smart caption will appear when you press the m uting button, only on channels where the broadcast contains closed captioning. (av-56p585 only) ? when you select on, it will be the mode selected in the closed caption menu. ? see page 43 when you set the caption/text mode. ?? ??? ??? ???? ????????? ?? ?? ??? ??? ???? ????????? ?? lct1609 english 3/8/04, 11:04 am 60
this feature will help you adjust the picture you are watching to give you the best possible picture quality. regular - the regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen. the 4:3 picture will fill the screen from top to bottom, while black bars will appear to fill up the remaining space along the pictures sides. the 4:3 picture will be centered within the boundaries of the 16:9 screen. button functions 61 aspect aspect ratios panorama - with this ratio a normal 4:3 aspect picture is stretched to fit the dimensions of the 16:9 aspect screen. cinema - this ratio zooms in on the center part of a 4:3 aspect picture, blowing it up to fill the 16:9 screen. full - this is the ratio to use when watching 16:9 high-definition broadcasts. hd panorama - this ratio stretches the high-definition 16:9 aspect image to eliminate the black side bars. cinema zoom - this ratio stretches the high-definition 16:9 aspect image to eliminate the black surrounding bars. lct1609 english 3/8/04, 11:04 am 61
the m enu button allows you to access jvcs onscreen menu system. press m enu to activate the onscreen menu system. ? see individual topics like sound adjust for specific information on using menus. menu button functions 62 back ok this button allows you to go back in the menu to change a selection or correct a mistake. this button confirms your selection when you are in one of the onscreen menus. when you change the aspect ratios, it is different from their broadcast or recorded program. aspect ratios (continued) press the a spect button ? by pressing the a pt button, you can change the size. ?????? ?? ?????? ?????? ???? ??????? ?????? ???? ??????? ??????????? ???? ?????? ???? ?????? ?? ?????? ?????? ???? ??????? ?????? ???? ??????? ??????????? ???? ?????? ???? notes: ? you can also choose the size by pressing the ? buttons. ? when you change the aspect ratio or signal, reset the picture position to center. ? you can also access the front control panel screen by using the m enu button on the front of the tv instead of the remote control. it appears between initial setup and picture adjust screen, and it has input, video status and aspect menus. choose aspect by pressing m enu ? on the front panel and choose a mode by using the c hannel +/- buttons ( operate ? ). hd (1080i, 720p) ntsc, 480i, 480p lct1609 english 3/8/04, 11:04 am 62
use either the televisions own tuner or a cable box to select channels. set this switch to tv to operate the televisions built-in tuner. move the switch to catv to operate a cable box. note: ? see page 24 for information on programming your remote for cable box operation. you can control a vcr or dvd player with the buttons on the lower part of the remote control. move the slide switch to vcr or dvd to operate. notes: ? the remote is preset with the code 000 to control jvc-brand vcrs. for any other manufacturers brand vcr, please see the code chart and instructions on page 25. ? the remote is preset with the code 000 to control jvc-brand dvd players. for any other manufacturers brand dvd player, please see the code chart and instructions on page 26. tv/catv slide switch vcr/dvd slide switch you can also use this remote control to operate the basic functions of your dvd player. these functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off. move the selector switch to dvd to operate. ? the remote is preset with the code 000 to control jvc-brand dvd players. for any other manufacturers brand dvd player, please see the code chart and instructions on page 26. you can use this remote control to operate the basic functions of your vcr. these functions include: play, record, rewind, fast-forward, stop, pause, channel scan, tv/vcr, power on, and power off. move the selector switch to vcr to operate. ? the remote is preset with the code 000 to control jvc-brand vcrs. for any other manufacturers brand vcr, please see the code chart and instructions on page 25. button functions vcr buttons dvd buttons 63 all remote control buttons are illuminated, except for the tv/catv slide switch, vcr/dvd slide switch and light button. press the l ight button to turn the illumination on for 4 seconds. light this button is only located on the front panel of your tv. when you press the s uper f ocus button on the front of the tv, you can access the auto convergence mode in the convergence menu screen automatically. see page 40. super focus lct1609 english 3/8/04, 11:04 am 63
no program 64 if the tv channel you selected, or were watching is not receiving a signal, "no program" appears on the television screen. it appears when that channel is not receiving a signal and you have the noise muting function off and you have a single screen. it moves automatically every two seconds to prevent the screen from burn-in. see page 6. note: ? even if "no program" appears on the screen, your timer functions and auto shut off functions that you set, are still active. lct1609 english 3/8/04, 11:04 am 64
troubleshooting 65 ?????????????? ?? ? ??????????????????? ???????? ? ??????????????????? ? ??? ???????????? ?????? ??????? ??????? ? ?? ??????? ???????? ?????????? ?????????????????? ? ??????? ???????????????? ? ?????????????????? ?????????????????????? ?????????????? ??? ? ????????????????? ?????????????? ??? ? ????????????? ??????????????? ??? ? ???????????????????? ? ?????????????????? ? ????? ????????????? ????? ? ??????????????????? ? ???? ???????????? ?????????????????????? ? ???????????????? ?????? ? ?????? ??????????????? ?????????????????????????? ?????? ??? ??????? ? ???????????????????????? ?????????? ?????????? ? ?? ?????????????????????????????????? ?? ???????????????????????????????????? ?? ?????????????? ?? ???????????? ???? ? ????????????????????????????????? ?? ?????????????? ?? ???? ????????????? ??????? ????????????????? ?? ???? ?????????????????????????????????? ????? ?????? ???????????????????????? ????????????????? ??????????????? ????????????? ????? ???????????????????????????????????????????????? ?? ? ?????? ??????????? ????? ???? ???????????????????????????????? ?? ? ????? ?????????? ???????????? ?? ?? ? ?????????????????????? ??????????????? ????? ?????????????????????? ??????????????????? ???????????????????? ???????????? ?????? ?????????????????????????????? ? ??? ???????????????????? ??????? ??????????? ????? ???????????????????????????????????????? ??? ?????????????????? ????????????? ????????????? ?????? ?????????????????????? ??????? ??????? ????????????? ?? ?????? ????? ????????? ?????????????????? ??? ????????????? ????????????? ? ?? ????????????????? ????????????? ???????????? ????????????? ?? ???? ???????????????????? ???????? ????????????????????????? ????????????? ?? ????????????????????? ?????????????????????????? ?????????????? ????????????????????? ? ? ?????????? ?????? ???? ??? ?? ??? ????????????????????? ????????? ?????????? ?? ? ?? ????????????????????? ???????????????????? ???????????????? ????? ?????????? ? ??????? ??????? ???????????????? ?? ?? ??? ?? ????????????????? ??????????????????????????????????????????? ? ????? ??????????????????????????????????????????? ?????? ? ????? ?????????????????????? ???????????????????????? ???????????????????????????????????? ? ??????????????? ? ?????? ?? ????????? ????????????????????? ?? ? ?????????????? ????????????????????????????????? ???? ????? ?????????????? ? ????????????? ??????????????????????????????????????? ?? ??????????????????? ?? ?????????????? ? ???????????????????????????????????????????????? ????? ???????????????????????????????????? ????????????? ??????????? ???????? ????????????????? ?????????? ????? ???????????????????????? ??????????? ????? ??????? ????????? ?????? ??????????????????????????? ????????????? ?? ??????? ? ??????????????????????????????????? ????????????????? ? pr oblems check ????????????????? ????????? ???? ????? ?? ?? ?????????????????????? ???????? ??????? ?????????????? ???????? ????? ?????????????????????? ??? ???? ???????? ?? ???????????????????????????????? ??? ??????? ???????????? ?????????????????????? ???? ??? ?????????????????????????????????????????????????????????????? ??? ? ??????? ????? ? ??? ????? ??????????????????? ????????????????????????? ?????????????????? ????? ??????? ??????????????????? ?????????????????????? ??????? ???????? ??????????????????????? ? ??????????? ?????????????? ??????? ???????? ???????????????? ??????????? lct1609 english 3/8/04, 11:04 am 65
66 lct1609 english 3/8/04, 11:04 am 66
67 lct1609 english 3/8/04, 11:04 am 67
?????????????????????????? ???? ???????????????? ??????????????? ???????????? ????????????????? ????? ????????? ????????? ??????????????????????????????????????? ????????????????????????????? ???????????????????????????????????????????????????????????????? ?????????????????????????????????????????? ?????????????? ???? ??????????? ?????????? ?????? ???????????????????? ?????????? ???????? ?????????????? ? ???????????? ?????????????????????? ???????????????? ??????????????????????????????????? ???????????????????? ?????????????????????? ??????????????????????????????????????? ??????????????? ???? ??????????????????????????????????????????????????? ??????????????????????? ??????????????????? ??????????????????????????????????????????????????? ????????????????????????????????????? ???????????????? ???? ??????????????????? ? ?????????? ???????????? ? ???????????????????????????????????????????????????????????????????????? ? ????????????????? ???????????????????????? ?????????????????? ????????????????????????????????????????????????? ? ??????????????? ?????????????? ????????????????? ??????????? ?????????????????? ????? ???????????????????????????????????????????????????????????? ????????? ???????????????? ???????????????????? ?????????? ???????????????????????? ???????????????????? ???????? ???????? specifications subject to change without notice. specifications 68 lct1609 english 3/8/04, 11:04 am 68
notes 69 lct1609 english 3/8/04, 11:04 am 69
notes 70 lct1609 english 3/8/04, 11:04 am 70
notes 71 lct1609 english 3/8/04, 11:04 am 71
jvc company of america division of jvc americas corp. 1700 valley road wayne, new jersey, 07470 jvc canada, inc. 21 finchdene square scarborough, ontario canada, m1x 1a7 lct1609 english 3/8/04, 11:04 am 72

▲Up To Search▲

Price & Availability of AV-56P575

	To Download AV-56P575 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .